Canned Food Produce Line

1,Cut head,tail,guts conveyor machine
a,SUS304 stainless steel material,total length 8 meters, Transmission adopts thickness 4 mm flat belt conveyor, divided into two layers. upper layer conveyor cut head and tail finished products. width is 500 mm. lower layer both side has two conveyor belt transmission head and tail,width:150mm, high:180mm.
2,Bubble cleaning fish machine
a,bubble time15~20 minutes.
b,Salt water tank with 5 root brines shower pipe circulating.
c,water won't mix with salt water, after water spray will emissions by a vase.
d,there are two bar magnet in context layer. 
e,The machine contact with salt water are made of SUS316L material.
f,size:1100×1200×1800mm
g,the machine feed material height is 600mm(Height may not be enough,require 30cm from scraper mesh bag to salt water tank top),out material height 1400mm.
h,the machine body thickness is 2.0mm,leg square tube is 60×40×2mm,supporting feet can adjustable.
    i,the machine adopts stainless steel woven mesh, On both sides has the chain, pitch: 38.1 mm, in the middle of every 254 mm shaft strengthening, network distance: 15 mm, the wire diameter:  2 mm, mesh belt effective width: 970 mm, speed adopts stepless speed control of motor speed, mesh belt speed for: 350 ~ 1400 mm/min, at beginning ascension has high barrier, preventing fish more slippery outside the mahchine.
    j,the machine adopts stepless speed regulation,power 1.5KW.
    k,The machine in addition to the motor, rubber, nylon strap, electrical appliances, etc., other are of 304 stainless steel material.
l,at the bottom of the Import and export channel each has a hand hole, can clean the sundries in the cabinet. Keep the drain of the bottom in the lowest position, ensure no water.
    m,Brine filtration unit, two filters, at the bottom of the box body for 200 mm height as precipitation.
3,Fish washing well work plateform
Platform with a thickness of 2 mm plate folding, stent with 38 * 38 rectangular control, supporting feet can be fine-tuning, SUS304 stainless steel material.
4,Draining conveyor belt
Delivery is made of engineering plastic chain plate 82.5 x 38.1 side panel 2 mm stainless steel plate, supporting feet using 51 x 2 stainless steel tube, infinitely adjustable-speed motor.
5,Draining machine
With single inlet conveyor belt, spiral tank, with conveying rotary table into the drop, the tail with top tip out, installed at the bottom of the wheel is sent out, drop water plate, two step, bracket with 60 x 40 party controls, motor power: 0.75 kw per level, bearing adopts SUS304 stainless steel, apart from the motor, chain plate of stainless steel.Imports also height is 800 mm, height is 870 mm.
 
6,soup filling machine
Conveyor belt use polyurethane, in order to enhance the tensile strength with stainless steel wire, feeding has material box below conveyor belt, guardrail intensive casing, cylinder size of each one, single not keep temperature, material cylinder and liquid level control device, tomato sauce wait back material pumped to aniseed cylinder, returned to the material they can discharge, supporting feet with 60 x 40 square controls, motor power: 0.55 kw, apart from the motor bearings are of SUS304 stainless steel.(add soup to two, from material to bring. Add spray wash tank outlet device) connected to prepare pot pipe.
7,Seamed can elevator
Import connecting sealing machine slideway, export connection solid tank cleaning machine, adopts the stainless steel material.
8,Seamed can cleaning machine
304 stainless steel material manufacturing, plastic net chain, conveyor width is 320, pitch is 38.1 mm, belt outside width is 450 mm , side plate thickness is 2 mm, movement speed for 10 to 15 m/min, apart from the motor, bearing, chain plate others made in stainless steel material, and production capacity: 130 cans/min, ascending chain conveyer, rotates, clean with a soft brush rod transmission points high pressure hot water washing and water washing, hot water 90,water nozzle for 16, water, hot water transport with round steel rail, the upper is equipped with sealing cover cap, lower heating circulating water with filtration system, circulating pump for high pressure sanitary pump.
9,Seamed can conveyor belt
Delivery is made of engineering plastic chain plate 82.5 x 38.1 side panel 2 mm stainless steel plate, supporting feet using 51 x 2 stainless steel tube, infinitely adjustable-speed motor.
10,Stacker crane blow drying system for finished production
For seamed cans discharge cans, turn cans, blow dry, transportation pallet, picking platform, blow dry scraper chain conveyor, cage machine material for SUS304 stainless steel.
11,Empty cans destacking washing machine system
Used to discharge the cans stamping, cleaning, disc conveyor, empty cans cleaning and the spiral part can separate and so on, all the cans after stamping on the discharge improve stamping machine rack, according to layers can improve discharge cans, and then through the disc conveyor to send empty cans to turn over and made empty cans open downwards then into the empty tank cleaning machine to clean. After that the cans through disc conveyor made cans up to the lower chain plate conveyor sent the cans.