Basic Info.
Processing Object
Animal Feather
Processing Technics
Mixing-before-Crushing
Screen Mesh
With Screen Mesh
Grinding Equipment Type
Feed Hammer Mill
Pellet Mill Type
Screw Granulator
Bulking Machine Type
Twin Screw Bulking Machine
Expanding Method
Wet Expansion
Applicable Materials Shape
Pie
Capacity
500kg/Batch-500mt/Batch
Product Description
RAW MATERIAL:FEATHER,CHICKEN FEET,BLOOD
WASTE GAS TREATMENT: WASTE GAS BY THE HEAT EXCHANGER, CAN PROCESSING HOT WATER, REALIZED WASTE HEAT RECOVERY, RESIDUAL WASTE GAS THROUGH CALCINING DEODORANT, DISCHARGING STANDARD.
ELECTRIC APPLIANCES USED INTELLIGENT CONTROL, THE HOST ADOPTS FREQUENCY CONTROL , PRESSURE AND TEMPERATURE EARLY WARNING.
Feather meal processing equipment technical parameters
(5t raw material/batch/4hours)
()Feather pretreatment
BY01 Feeder 1200X2500
Size:LWH(2800x1500x1500mm)
Power:motor P=11kw;
Structure material:
Material used Q345R Wear resistant steel,thickness :12mm;
Screw blade thickness:16mm,used Q345R;
Reducer adopts ZQ500 type.
Qty :1set
BY02 Feather dehydrator Φ400X1600
Size: LWH(2900x600x1200mm)
Power:motor P=18.5kw;
Structure material:
Used single screw extrusion, squeezing effect and degreasing effect is good;
Screw blade thickness:14mm, used Q345R material;
Reducer adopts ZQ500 type.
Welding stainless steel bar production;
The machine shell and door made by SUS304 stainless steel;
The driver used V belt transmission;
Qty:1set
BY03 Belt conveyor B600X7000
Size:LWH(7000x600x600mm)
Power:motor P=3kw;
Structure material:
the shell made by SUS304 stainless steel,thickness :2.5mm;
whole Stents made by SUS304 stainless ateel
QTY:1set
BY04 Electrical control cabinet , wire and cable
Electrical control cabinet with running lights;
Electric control cabinet adopts behind open door, convenient maintenance.
The wire and cable, Connection between electrical control cabinet and electric motor;
total power:P=32.5kw;
()The hydrolysis of material processing
BY05 High temperature hydrolysis tank Φ1500X4000
Size:LWH(6200x1800x2200mm)
Power:motor P=37kw
Structure material:
Main shaft adopts Φ 377 x 25 seamless steel tube production, material is 45 # carbon steel materials, filled with steam, increase the heat transfer area;
Tank evenly layout stirring tooth ,made by wear-resisting Q345R (mn).
The inner cylinder made by material Q345R wear-resistant steel, plate thickness: 18 mm; Outer jacket made by Q235B carbon steel plate ,outside thickness = 12 mm; flange thickness: 60 mm, head thickness: 18 mm;
The equipment adopts outer jacket type structure,Inside and outside layer spacing<=70mm;
Reducer machine adopts hard tooth face ZLY280;
Adopt chain transmission, discharging way: one head discharging;
Effective volume:V=5.2m³;
Heat preservation:Using aluminum silicate,Heat preservation plate adopts stainless steel SUS304, thickness δ=1.2mm;
Steam consumption:450kg/h;
QTY:1set
BY06 complete set of accessories QTY:1set
Hydrophobic device: use rotary joints and stainless steel hose DN50, discharge of condensed water in the main shaft and the outer jacket;
Equipment overall support: made of H steel instead of cement base;
Equipment operation platform: carbon steel checkered plate, thickness: 3.0 mm; column and escalator: using carbon steel pipe
Pipeline installation: steam, hydrophobic and pressure exhaust steam pipe adopt seamless steel tube production;
BY07 electric control cabinet QTY:1set
Electrical control cabinet with running lights;
Electric control cabinet adopts behind open door, convenient maintenance;
TOTAL POWERP=37Kw;
()Material Drying Process
BY08 STEAM SRYER Φ1500×6000
Size:LWH(6800x1700x2200mm)
power:motor p=37kw
Structure material:
dryer machine cylinder inside 16 mm, outer barrel 12mm, all made by Q235B steel sheet material;
Main shaft adopts Φ 377 x25 seamless;
Used the coil pipe type heating way, USEd the seamless steel tube Φ 89 x 6, the plate thickness 14 mm , are all made by Q235B Carbon steel material;
Reducer adopts hard tooth face ZLY280 ;
the cover made by SUS304 stainless steel ;
The equipment adopts outer jacket type structure,Inside and outside layer spacing<=70mm;
Thermal insulation material used aluminum silicate, heat preservation plate made by stainless steel SUS304, thickness : 1.0 mm;
BY09 ANCILLARY ATTACHMENT QTY:1SET
Hydrophobic device: use rotary joints and stainless steel hose DN50, discharge of condensed water in the main shaft and the outer jacket;
Equipment overall support: made of H steel instead of cement base;
Equipment operation platform: carbon steel checkered plate, thickness: 3.0 mm; column and escalator: using carbon steel pipe
Pipeline installation: steam, hydrophobic and pressure exhaust steam pipe adopt seamless steel tube production;
BY10 ELECTRIC CONTROL CABINET QTY:1SET
Electrical control cabinet with running lights;
Electric control cabinet adopts behind open door, convenient
maintenance;
TOTAL POWER P=37Kw;
()Material conveying
BY11 SCREW CONVEYOR Φ400X5000
Size:LWH(5500x400x400mm)
power:motor p=4kw
Structure material:
Shell thickness :4 mm, screw blade thickness 4 mm, are all made by SUS304
stainless steel .
Main shaft adopts Φ 102 seamless steel tube production, the material of
carbon steel;
hydrolyzed material transfer to steam dryer;
QTY:1set
BY12 SCREW CONVEYOR Φ300X4500
Size:LWH(5500x300x300mm)
power:motor p=3kw
Structure material:
Shell thickness :4 mm, screw blade thickness 4 mm, are all made by
SUS304 stainless steel .;
take Dry material transfer to rotary cooling inside the screen;
Conveying cooling material
QTY:2set
BY13 Electrical control cabinet ,wire and cable
Electrical control cabinet with running lights;
Electric control cabinet adopts behind open door, convenient maintenance;
the wire and cable, Connection between electrical control cabinet and
electric motor;
TOTAL POWER P=10Kw;
()Material cooling and filtering processing
BY14 TURNING COOLING SCREEN YF1000X2500
size:LWH(3000x1200x2000mm)
power: motor p=2.2kw
qty:1set
Structure material
The holder uses Q235B material. The part of holder which connecting to
material is made of SUS304 stainless steel. δ=2mm
Cooling and screening material, discharge two level of material.
Deploy the spiral conveyor and conveying the material on bottom.
TOTAL POWER P=2.2Kw;
() Exhaust Cooling Treatment
BY16 DIESEL PARTICULATE FILTER Φ800X1800
all made by q304 stainless steel,δ=2.5mm;
qty:2set
BY17 Horizontal condensing equipment Φ800
Size:LWH(4000x900x2000mm)
Structure material:
The shell of body is made of carbon steel Q235B,δ=8mm .
Cooling pipe is made of Φ32×2.5 and SUS304
Heat exchange area: 90/set
qty:2set
BY18 Stainless steel induced draft fan Y6-41
The shell of body is made of SUS304
Power:P=11kw;
QTY 1SET
BY19 cooling tower
Structure material
Cooling and circulating hot water.
Material: glass fiber reinforced plastics
Thickness: 10mm
Handling capacity: 80m³/h
Treatment capacity:80m³/h;
QTY:2SET
BY20 circulation water basins
on-site production, cement concrete ;
BY21 Pipeline pump
Treatment capacity:80m³/h;
power:5.5kw;
QTY:2set ;
BY22 Light lifting equipment
Size LWH:3500*1200*1500mm
The shell of body is made of SUS304 stainless steel.
treatment capacity:10,000m³/h;
power:7.5kw;
QTY:1set
BY23 Exhaust connection pipe
Made by sus304 stainless steel,length 25m;
End of exhaust pipe
Made by sus304stainless steel;
Diameter 350mm,height 15m;
BY24 ELECTRIC CONTROL CABINET
Structure material
Electrical control box: There are an RUN LED. Using back pull out, it is
convenience to detection and repairing.
When the equipment failure, please give an alarm and stop running.
QTY:1SET
TOTAL POWER P=29.5Kw;
()Steam boiler and auxiliary equipment
BY25 Steam boiler and auxiliary equipment
Steam capacity:2000kg/h;
Fuel:coal;
With steam header, water softening system and gas desulfurization
system.
Power:p=22kw
Qty:1set
()Other accessories
BY26 Equipment interconnection piping
Pipe connecting with equipment: Steam pipe,drain water pipe.
Steam pipe heat preservation processing.
Electric control box's electric wire connects to equipment power.
Electric wire series and supporting frame.
QTY:1SET
REMARKS:Equipment installation, test running, lubricating oil, gear oil, etc.,
required by advertisers;
BY27 Equipment connect the valve and year cycle accessories, etc
Address:
Rm 311, Yingshi Building No. 65, Xianggang Middle Rd, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Manufacturing & Processing Machinery
Company Introduction:
Qingdao Silvcorp Co., Ltd. Established in 2004, is a leading machinery manufacturer and exporter of fish meal machine and canned food machine. The range of our product line, good quality, and competitive prices have made us one of the fastest growing companies of its kind in China.
Our factory lies in Qingdao city, which is only 5KM to airport and 40KM to sea port. The construction area is about 1500M2. There are over 500 skilled workers and 50 technologists. We produce a wide variety of fish meal machine, feather meal machine and canned food machine items in a the fields of machinery. These items are of good quality and advanced design idea, are popular with customers, and sell well.
All the excellent and professional staffs with rich experience and concept in all aspects inside our trade department. They are proud to specialize in sourcing products as per the customers′ demands and figuring out perfect solutions to all problems raised by the customers, which has been very much impressed by all our customers, no matter who have done business with Silvcorp already or not yet.
For more information or to place an order, please log onto our web site or contact us by telephone.
